The Pros and Cons of Using Metal Roofing Materials

When you’re dealing with roof repair, Greenville SC experts will typically be able to handle any problem without major concern. However, when it comes time to replace your roof with a new one, choosing the right material will not be an easy task.

Metal roofing has been used in the Greenville area for a long time with impressively good results. Steel and copper roofs tend to last more than half a century, especially if they are well-maintained. So the start is definitely promising. But are these metals able to withstand the test of time even when they’re placed under significant strain?

commercial roofing contractors Greenville

Advantages of Metal as a Roofing Product

A metal roof has many advantages, as experts in roof repair in Greenville SC will be able to confirm. These roofs are typically low-maintenance, and they don’t usually require expensive repair work. Moreover, metals such as steel are cheap and reusable, so aside from being durable and resilient, your metal roof is also more helpful to the environment compared to roofs made out of other materials.

Of course, metal roofing has many other advantages that are worth considering as well:

  1. It’s virtually storm-proof. When a big storm hits in Greenville, a lot of homeowners and business owners have to get on the phone with their roofers and insurance companies to get their roofs properly repaired. Owners of high quality metal roofing will likely just have to do a quick visual roof inspection and then clean up some debris, after which they can go about their business.
  2. Metal roofing doesn’t require much maintenance even at the worst of times. Annual maintenance is typically enough, and you’ll find you can even extend the lifespan of your roof, if you perform your maintenance regularly and correctly.
  3. Metal roofing products are also great for enhancing other types of roofing systems. Your old asphalt shingle roof, for example, can do well with some upgraded flashing made from aluminum. Since damaged flashing is often the cause for roof leaks, you might be able to extend the life of even the cheapest roofs by just switching to aluminum flashing.
  4. Finally, metal roofing can also be very stylish. Especially when you consider how good a high quality copper roof would look on top of your home, you’ll find that the extra cost of such a roof will be well worth it just for the added curb appeal.

What a Metal Roof Might Fail to Do

As you well know, metal tends to rust, and there is no good way to prevent that once the coating is gone and your metal roofing materials are directly exposed to bad weather. To prevent that, you might have to do some careful checks and hire commercial roofing contractors Greenville businesses recommend to perform annual roof inspections.

For the same reason, a typical metal roof will also fail to cope too well with Greenville’s humid, subtropical climate. As a result, professionals who commonly deal with roof repair in Greenville will likely advise you to consider investing in a more expensive metal roof featuring materials that can better cope with rain and humidity; if you are convinced that metal is the best option for your home or building.

How Can Your Roofing Company Help You with Filing Insurance Claims?

A lot of the time, people underestimate the resourcefulness of a dependable roofer.  Aurora roofing companies are able to provide high quality services and to inform you when your roof needs to be repaired or replaced. However, they can also help with another vital aspect of keeping your home in order: the filing of insurance claims when your roof was damaged by a storm.

We Can Help Roofing Companies Insurance Claims

Why You Need a Roofer to Help You


It often seems to people that filing an insurance claim is more of a formality. You need to present your insurer with proof that your roof was damaged and some additional paperwork, and in turn they will help fix your roof through financial support. Roofers typically come into play at this point, when they need to start the work of repairing or replacing your damaged roofing system.


However, this isn’t exactly accurate. As a homeowner you’ll want to get as much support as you can, since you already know that you’ll have a lot of money riding on the project. If your roof was damaged extensively, you might need to spend as much as $1,000 or even more on your repairs, and if you need to have it replaced, the price could escalate even beyond $10k. As a result, you already know that you’ll have to make a compelling case to convince your insurer to help you out.


Roofing companies can help you do that. Not only will they assist you in evaluating the cost of the repairs – which your insurance company might do, but leaning more towards reducing their contribution rather than giving you a fair assessment – but they can also help you with the preparation of your evidence and, most importantly, with finding out exactly where the roofing damage originated.


This last point is a very important one. If the source of the damage (for instance, hail or fire damage) is listed in your insurance among the types of damage that are covered by your premium, then you already have a compelling case and your roofers will have already helped you a lot.


Call Your Roofers in Early


Much like you wouldn’t disturb the scene of a crime before calling the police, it’s important to avoid moving anything before taking photographs of your roof and calling your roofers to inspect it.


Moving stuff around before taking pictures of the evidence can make things problematic and give your insurance company room to complain that the evidence was not gathered and filed correctly. That could even lead to you losing some of the rightful compensation that you should get after filing your claim.


An experienced and dependable roofer will arrive at your home quickly and evaluate the damage, while also showing you exactly how to take your photo and video footage in such a way that not even your insurer’s experts can question it. That way, you’ll have the best possible chance of getting more funds to repair or replace your roof, and you can get on with your life without having to empty your bank account first.

Are Asphalt Shingles Good Enough for the Hot Texas Weather?

The weather in Texas can be pretty warm at the best of time, and your roof can easily be affected by both the heat and the strong UV rays that are constantly bombarding it. Of course, when selecting a roof for your Texas home, you’ll want to make certain that it performs well enough and that it can withstand the hot and often fast-changing weather here. So, would asphalt shingle roofing really live up to that performance?

San Antonio roofing companies

How Heat Affects Asphalt Shingles

Asphalt is quite common as a roofing material. However, the big problem with asphalt shingles is that they are not that resilient. Aside from the fact that they will normally lose their structural integrity entirely after about 20 years, asphalt shingles are also prone to damage from hail, strong winds and fire – which, of course, also implies heat.

Some of the damage caused by heat on asphalt shingle roofs can include the following:

  • Cracking: asphalt can be somewhat brittle, and its sensitivity to heat is partially due to its high thermal expansion. Much like the way the asphalt on your local street can crack as a result of high temperatures, the asphalt on your Texas home will do the same if exposed to heat long enough.
  • Overheating your home: As asphalt shingles overheat, they can pass on the heat to your attic and the rest of your home. Of course, you can paint your roof in a lighter color and install additional insulation, but these processes can take more effort and greater skill to get them right, as well as requiring more money.
  • Damage to flashing: As the asphalt expands as a result of being exposed to the sun’s harmful UV rays, it can damage areas that are not meant to move around, such as the flashing. Flashing is meant to keep your roof watertight, and without it operating properly, you could start experiencing leaks.
  • Shrinking: Temperature changes in Texas are quite sudden, which means the changes they create are fast as well. Once temperatures drop after a heat wave, the asphalt shingles can contract and shrink, which leads to the nails holding them together popping out and causing parts of the roof to lose their structural integrity and stability.

Alternative Roofing Solutions for Texas

Considering all these facts, asphalt shingles are not necessarily the best option for your Texas roof, although some might think they are because of their lower than average cost.

As an alternative to a cheap asphalt shingle roof, you can get a metal roofing system for only a slightly higher price, and enjoy a far better experience. Metal roofing is low-maintenance and extremely durable, as well as presenting exceptional reflective qualities that are perfect for a cool roof. Other alternatives can also include slate, terracotta, clay and concrete roofing systems, primarily featuring tile roofing designs that can provide a more resilient structure.

To gain access to the best roofing services for getting your new roof installed in no time, contact your local San Antonio roofing companies, and compare their services and estimates to find out your full options.

Is Tile Roofing a Good Enough Choice for Your Missouri Home?

If you want to install a roof that is built to last, it’s important to at least consider tile roofing as an option. While traditional shake and shingle roofing can be enticing, the structure and the layout of the elements making up the roof can often fall short of providing the kind of protection that Missouri homes might need.

Tile roofing, on the other hand, has a structure similar to the self-supporting structure of brick or masonry, which ensures that each tile offers adequate support to the two tiles above it. This configuration has been known throughout the years to offer superior protection to roofing systems that make use of it.

Springfield roofing

Popular Types of Tile Roofing That Could Work

As times change, new and enhanced roofing materials are designed to minimize the drawbacks of their past counterparts and offer superior support through the sturdy tile configuration. Following are a few of the most well-known roofing tiles that could support your Springfield, Missouri home quite well:

  • Composite tiles are made from fiber glass or a combined and enhanced version of asphalt that offers better protection and lasts longer than traditional asphalt shingles. Fiber glass composite tiles typically offer the protection and appearance of clay and concrete tiles but without the heaviness of those materials.
  • Metal tiles have to be considered because of their energy efficiency, easy installation, impressive durability and the fact that they’re virtually maintenance-free.
  • Slate tiles are some of the more aesthetically pleasing tiles you can get. Expensive yet luxurious and designed to last longer than any tiles you can buy, slate tiles will enchant you and your visitors and increase your home’s resale value a great deal.
  • Polymer sand roofing tiles are a growing trend in the roofing industry. Although their technologically advanced construction process makes them more expensive, these modern tiles are extremely durable, virtually fireproof and offer excellent low heat conduction capabilities.
  • Ceramic roof tiles are typically very clay-like and very popular because of their aesthetic appeal, easy construction process and respectable durability. To be easier to manage, ceramic tiles should be bought in smaller sizes, and it’s also important to track down tiles that are made by the best manufacturers in the industry.

The Superior Resilience of a Tile Roof

Because of their structure and layout, tiles correspond to the way bricks are designed to offer superior resilience and durability in the construction of long lasting buildings. Tiles will do the same thing for your roof, which is something that you will definitely want to consider, keeping in mind the widely changing weather and the strong winds you can expect in Missouri.

If you just moved to Missouri and you’re looking for a sturdy and reliable roof, it’s a good idea to choose one of the types of tile roofing mentioned above, so you can ensure that you don’t have to deal with complex maintenance and costly repairs at least during the first years of home ownership. Make sure you find a dependable Springfield roofing contractor who is experienced with the installation of tile roofs, as the process can be somewhat more challenging than in the case of most shingle and shake roofing systems.

The Best Residential Roofing Products for Durability

Roofing materials vary in terms of many features, durability being one of them. While the time that a roofing system can spend on a building is determined by numerous factors, including the type of the climate that the roof is exposed to and the amount of maintenance received, the type of material is also an important factor. Every building owner is looking for durable roof materials, so here are the ones that stand out in terms if longevity.

Metal Roofing

In the past, metal was a material used almost exclusively on commercial and industrial buildings and mostly on flat roofs. As the technology of manufacturing metal roofing materials evolved, new alloys and coatings were developed and the manufacturing methods were also extended to produce not only large panels to be installed on roofs, but shingle- and tile-shaped components as well.

Today, metal is not only one of the most varied and most attractive roofing materials, but also one of the materials that offer the highest durability. Many roofing systems that use metal are warranted for 30-50 years and the material is exceptionally strong, too, providing protection from severe weather, including storms and other extreme events. The material is also impervious to fire and pests.

roof repair Lakewood CO

Clay and Concrete Tiles

Roof repair Lakewood CO contractors will attest that both types of tiles are extremely durable and strong – small wonder that terracotta tiles have been among the materials that have been most widely used on roofing all over the world for thousands of years.

The manufacturing process of clay tiles involves baking at very high temperatures, which makes the material exceptionally durable. The process removes any access moisture and seals the surface of the tiles, making them resistant to any weather, to fire and pests, too, the only thing that can harm clay tiles being strong impact. Most clay tile products offer a longevity of about 100 years.

Concrete is another very durable material, the tiles made from it offering durability of up to a century, just like clay tiles. The material is made from a mixture of cement, water and sand – a combination that ensures strength and longevity.


Slate roofs are made from pieces of natural stone installed in an overlapping pattern, with special nails. The solution is on the expensive end of the price range, but each piece of stone is unique and the aesthetic appeal of slate roofs is second to none. The material is completely water-proof and fire-proof, impervious to pests and it stands out not only with the superior protection and the attractive appearance it offers, but also with its durability of over a hundred years.

The building owners who consider getting a slate roof must be aware that stone is a very heavy material, therefore the building that receives the slate roof must be able to support the weight of the material. Slate is easy to install, but the process requires a professional roofer and should never be attempted by amateur roofers. In terms of maintenance, the material does not require any special upkeep, other than regular cleaning and inspections.

Typical Causes of Roof Damage Over Time

Westminster roofing pros offer exceptional services

Roof problems even affect the building elements of the house and can be extremely costly if you do not take action immediately. Here are the most common causes of roof damage:

  1. Improper or faulty installation

One of the most common situations that homeowners face with a new roof installation is poor workmanship or low-quality materials. Improper installation significantly increases the occurrence of serious problems and reduces the life of the roof. When not installed correctly, rain, wind or snow can produce moisture, leading to infiltration, condensation and mold.

  1. Leaks and excess moisture

Regardless of the material used for the roof, leaks are some of the most common and most damaging problems. They occur most often around ventilation ducts, chimneys and other penetrations, because of damaged materials or problems with the pluvial system. Certain types of climate, weather conditions as well as anything that causes moisture affect the structure of the roof.

  1. Lack of ventilation or inefficient ventilation

Ventilation of the roof and attic is crucial for the performance and durability of the entire system. If the volume of air under the covers moves very little or not at all, you will experience condensation and heat accumulation. When vents are installed at the base and near the top of the roof, ventilation will occur naturally. If ventilation is inadequate, heat and moisture will damage roofing materials, insulation and rafters.

  1. Punctures and holes in the roof

Wind and hail can cause punctures and holes in the material covering the building. Besides, even if the roof is in good shape, water can still collect in certain areas and damage the roof over time. Roof damage can also be mechanical (caused by people walking on the roof, falling tree branches etc.). The fact is that damage accumulates over the years, affecting the roof`s structure, which leads to infiltrations.

  1. Lack of regular maintenance

When properly addressed, most roofing problems can be avoided. Regular maintenance consists in inspections and certain operations performed to ensure the integrity of the roof and to spot vulnerabilities while they are minor, easy to repair and cheaper. In the absence of proper maintenance, a roof will deteriorate faster.

  1. Weak resistance structure

If not planned and designed properly to support the roof, the structure can become weak over time. Roofing materials are typically heavy and some of them cannot even be installed until the resistance structure is reinforced (e.g. slate, ceramic tiles…) A thin structure will change its shape (in which case there will be differences between different roof slopes), it may become unstable and even collapse.

Hiring a licensed quality Westminster roofing company, along with choosing the right materials, installation and regular maintenance will help you enjoy a good roof for a longer time. Although many people are tempted to label some roofing problems as “minor”, you should know that there is no such thing as “minor” or “unimportant” roof problems; it is essential to pay attention to them when they occur, to avoid more extensive damage that will seriously affect your comfort.

What Is The Process of a Roof Repair

roof repair Snellville

The process of a roof repair may include easy or more complicated operations, depending on the degree of damage. The most important thing is to avoid postponing the necessary repairs, because they will become more and more extensive, requiring more money and causing increasingly more discomfort.

Ask for professional roof repair Snellville assistance

Improvisations are never a good solution, and repairing an element as complex and important as the roof is not something that anyone can do, given the required technical knowledge and skills. In addition, old roofs that have a complex architecture require certain special elements, which is why it is advisable to turn to Snellville roofing professionals.

Identifying signs that serve as indicators that the roof should be repaired is first step in the process of a roof repair.

  • Check the attic and the interior of the house for signs of water leaks. Water stains definitely indicate that your roof needs repairs, but sometimes the signs are more subtle.
  • Examine the roof it to see if there are any broken tiles or missing parts (which may have been torn or destroyed by storms, for example). Also, check whether there are curled or cracked tiles. If you find only a few broken or missing tiles, they will be easily replaced. However, if a larger area of the roof is affected, the cover materials may be outdated and the replacement of the entire roof may be absolutely necessary.
  • Check the condition and the functionality of the pluvial system, to see if it needs repairs. Gutters and downspouts are very important because they collect water from the roof and keep it away from the building.
  • If you notice or suspect mold formation in the house, the roof most likely not OK and repairs are probably required.
  • If you notice that you pay more for your energy bills but the indoor comfort is not so great, it is also a sign that the roof needs repairs, or the attic needs additional insulation.

Stages of a roof repair process

  • Identifying a reliable local roof repair Snellville contractor and scheduling an inspection
  • Issuing an estimate of the repair project (description of the damage, material requirements, work stages, costs, payment options etc.)
  • Signing the contract
  • Execution of works, which may include:
  • removal of broken items / accessories
  • replacement of damaged support elements
  • reinstallation of the anticondensation foil, a waterproofing material with a protective role against possible infiltration that can reach under the covers, facilitating their drainage through the gutters and downspouts
  • Installation of new elements/ accessories

Do not forget about checking your roof regularly! Early detection of minor problems can make a difference in the money you will have to pay for the necessary repairs, as well as in the level of your indoor comfort. Schedule periodic roof maintenance to always make sure that the roof is in good condition and that all the materials and accessories are securely fastened. Choosing a high quality cover, as well as an efficient drainage system protects your house from many problems.


Do Certain Types of Roofing Materials Attract Debris?

Roofs are exposed to many aggressions, such as polluted air that contains sulfur, chlorine compounds and nitrogen compounds that lead to the appearance of acid rain, variations of mineral salts, dust or soot. These atmospheric pollutants accelerate the degradation process especially when the impurities on the roof are not washed by rain.

A roof should be kept clean. Even dust accumulation can be a cause of degradation, by maintaining moisture on the surface of the roof for too long. Other type of debris, such as leaves, twigs, bird feathers etc. contribute to the roof`s degradation as well. On the other hand, a dirty roof is also unsightly and can make the entire house losing its appeal.

But let`s go back to the initial question: do certain types of roofing materials attract debris?

It is not actually about attracting debris, but keeping debris on their surface for a longer time. For example, debris tends to slip or be removed more easily by wind and rain from a sloped roof, than from a flat roof. Also, a metal tile roof, with a smooth surface, will keep its appearance cleaner than a ceramic tile roof, which due to the specific porosity of the material, can retain dirt and even promote the development of moss and algae, if the tiles are not cleaned periodically.

Potomac roofing pros maintain your roof with care and expertise

Roof cleaning should be included in the annual maintenance of any type of roof. Even if there are roofs made from materials that do not retain dirt, they still have a drainage system that has to be cleaned. If gutters get clogged by debris, they will be more prone to corrosion and cause unwanted water ponds and infiltrations. For this reason, it is recommended to remove debris using a brush and then check the drainage system using water from a garden hose. In case of need, it is advisable to clean the entire drainage system (the downspouts too!)

In general, roofing materials must be cleaned with a soft brush and water at low pressure; impurities in the areas seriously affected by the dirt can be washed with special detergents, preferably eco-friendly, to prevent harming the roof and the surrounding vegetation. Rinsing should be done from the roof ridge to the gutters, after the detergent has taken effect.

Biocides, chlorine, bleaches and common detergents are risk factors for the health of plants, so it is recommended to take special protective measures if you use them for cleaning your roof.

  • Apply biocide or repellent treatment in favorable weather conditions (in the absence of wind and precipitation).
  • Prior to the application of the treatment, you should water the plants in the immediate vicinity of the roof and even protect them with foils that prevent contact with the chemical solutions and their infiltration in the soil.
  • Also be very careful about using these solutions, as they are corrosive and can destroy some roofing materials. Make sure you consult with a Potomac roofing specialist before cleaning your roof, or leave the entire operation in their hands (highly recommended!).



How To Hire A Trustworthy Contractor After A Hurricane

Pensacola roofing hurricane repair

Hurricanes have become increasingly frequent in recent years and they have also become wider, longer and stronger, causing more and more damage to the buildings in their way. When a hurricane is announced, the best thing that building owners can do is to try and minimize the risk of damage by closing windows, moving outdoor items indoors and moving cars and pets to sheltered places, but if their property suffers serious damage, such as torn or shattered roofs and windows, damaged siding or other forms of damage, the affected properties will need repairs and they will need the repairs quickly. Unfortunately, the desperate period right after the hurricane, when the property is in a chaotic state and the owners are in a state of shock is the time when scammers or contractors who want to take advantage of the situation appear, offering subpar, overpriced services appear, so the most important thing amidst the chaos is to keep a level head and to make sure that the Pensacola roofing contractors you hire are trustworthy. Here is how.

Don’t Fall for Scammers

Contractors who show up at your door, offering their services aggressively without being invited, explaining to you how they have some roofing material exactly like yours, left from a previous job and requiring you to give them some money for some more material that they will buy and install for you right away should never be trusted. They are likely to disappear with your money or, if they do any work on your building at all, the quality of the work will be very poor and they will not offer any warranty on it.

Check Certificates and Referrals, Even If You Are Pushed for Time

Maybe water is pouring through your ceiling, your windows are just shards of glass and your entire property is a mess, but even so, you must definitely check your contractor’s certificates, licenses and other documents, such as referrals and insurances that prove his expertise.

The only situation when you can afford to skip this checking phase is if the contractor is recommended to you by your insurer. Insurance companies usually have a network of thoroughly verified contractors of their own, so if they recommend you a contractor, you can trust that contractor.

Get Estimates from at Least Three Contractors

This might also be difficult to do after a hurricane, when all contractors are busy handling emergencies, but it is very important, nevertheless. If you cannot find three contractors to request quotes from, at least make sure that the one that is willing to provide an estimate is willing to do it in writing and try to do some research to find out if the quoted prices are reasonable. If they are not – some contractors might up their prices in emergencies –, try to convince them to give you better prices or establish a payment schedule that you can afford. If the price is high, make sure that you get warranty for the work done and get the contractor to sign an agreement that includes all the details of the repair work, including payment terms, deadlines, the materials used for the repair and the warranties offered.

Never Pay More Than 10% in Advance

Reputable contractors might be expensive, but in most cases, they do not charge anything in advance. In special situations, you might agree to pay around 10% in advance, but not more.

Finding the Best Fort Worth Roofers

5 Things to Look for in a Roofing Contractor –  Fort Worth Tips for Finding the Best Roofers

If you need help from a professional roofing contractor Fort Worth is one place where you won’t find a shortage of reliable experts to assist you. But what is it that a professional roofer can provide you with, and what should you really look for in a local roofing company?

The following recommendations will help you get the most out of local roofing companies in the Fort Worth Texas area, and communicate with them efficiently about your roofing problems.


  1. Proper Insurance Coverage

Insurance is one of the first things to look for when you’re hiring a local contractor. Smaller firms in particular can have a way of ensuring lower costs, but without providing adequate insurance coverage.

You have to make sure your roofer has both liability insurance and worker’s compensation insurance. Instead of just taking their word for it, ask to see legitimate certificates, then call the insurance company to confirm your findings.


  1. Average Pricing Ranges

Any roofing expert will tell you that judging a roofing contractor based on their costs for roof replacement, repair and maintenance is not a good idea.

Get more information about each company you are considering, and aim for contractors within an average pricing interval. That way you can make sure the roofers you hire aren’t too cheap to do a good job. Also, you can avoid companies that charge a lot of money for basic tasks like fixing a leak or replacing a few tiles.


  1. Adequate Communication

You have to make sure the contractor you call will keep in touch. As soon as you send them a message or call them for the first time, they should respond promptly and politely.

If the roofer you contact takes a long time to get back to you, or promises that they’ll call and take several hours or even days to leave a message, that should already act as a red flag regarding how they treat their clients.


  1. Roofing Services for Colder Climates

Fort Worth, is an area where inclement weather is close to home. If you just moved here from a warmer climate you might need assistance and recommendations from local roofers on which type of roofing system to install or what specific services you should go for.

Contact several local roofing companies to learn more about the Texas climate, the roofing materials that are normally used for building sturdy, fashionable roofs in Fort Worth, and the time of the year when contractors are most active.


  1. Roofing Maintenance Made Easy

Roofing services can offer much more than just a quick fix or a new roof. They can also give you the long term assistance you need in order to keep your roof from breaking down and the upgrades that it may require down the line.

An established local firm with experience in roof inspections, general maintenance, gutter installation and roof damage prevention should be your first choice.

The best thing about a local roofing contractor, Fort Worth experts agree, is that you can get proper assistance at a short notice, and you’ll never have to wait too long before ensuring a quick fix for a leaky roof or other important issues.